HDMI 2.1 PureFIBER Terminations
|
Detachable Fiber Optic HDMI Termination (patented)
World-Wide Exclusive patented 8K Removable Fiber optic
termination FIBER PLUGS allow to pass the main cable anywhere then connect the HDMI,
reducing the required diameter of the main fiber cable to pass in any
conduit without the risk of damaging the HDMI connectors.
Removable HDMI connectors can be replaced at any time without the need
to replace the entire cable, making the PureFIBER solution ideal for
Home, residential, commercial integration, replacing slow cat6/7/8
extension solutions which also limits the HDMI quality to max 10
gigabit, bottleneck of the cable speed.
Both terminations require a common USB-A 5volts continuous power (50
milliampere) in order to share commands also when the
TV/Projector/Amplifier/Sources are turned Off, at the time these are
turned on.
|
Full HDMI 2.1 HD/4K/8K/10K
Our FIBER PLUGS fiber optic HDMI extenders terminations
supports all HDMI formats up to the latest HDMI 2.1 48 gigabit.
Specifications includes:
- Source HDMI 2.1 / Display HDMI 2.1 Termination set
- 4.9 feet / 1.5 Meters long - each side
- Fiber Optic laser transmission for pure error-free noise-free
connection of video & sound no copper cable can do.
- Full Compatibility with any legacy HDMI TMDS up to HDMI 2.1 FRL
48gigabit/s full speed
- Full Compatibility with any legacy HDCP up to HDCP 2.3 or Higher
- backwards compatible with earlier HDMI versions such as HDMI
1.3/1.4/2.0a/2.0b
- supports any resolution including SD HD 3D 4K 8K 10k
- Supports all frames rates including 4K@30 4K@60 4K@120Hz 8K@60 (and
world-wide variants)
- Supports DSC 4K@240Hz
- Supports 4K@144Hz 4:4:4 Uncompressed
- Full 4:4:4 HDR10+ Uncompressed (HDMI 2.1 Standard FRL 48gigabit full
speed)
- Dolby Atmos, THX, TRUE-HD, object-based audio, uncompressed 5.1 and
7.1, and 32-channel uncompressed audio
- Full Specs HDMI 2.1 including DSC, ALLM, QFT, QMS, VRR, Dynamic HDR, |
MPO Connectors
- 12 fiber MALE PC type standard MPO (with pins)
- Use 6 Fibers 1 to 6 TYPE-A Straight on the main cable (not inverted)
- Compatible with MULTIMODE Fiber Optics OM3 OM4 OM5 (cannot work on
single mode fiber - see our KVM or SDI product for single mode) |
USB TYPE-A Power connectors
Each termination requires 5 VOLTS 100 milliampere USB power supply
Power can be taken from common power strips equipped with USB charging
outlets
If power is connected from TV or the HDMI source, the USB Power might be
off when the equipment is off making it impossible to operate the CEC
consumer electronic controls during TV and Sources turn-on boot
operations.
Please cosider to connect a permanent stable USB power source to both
sides for the best interactive operations.
Our FiberPLUGS comes with auto stand-by so when no HDMI source is active
the lasers turns off for zero consumption |
Extended Length ARC over fiber (Patented)
Unique on the market our special Dedicated ARC over fiber Exclusive Priority link
connects the sound from the TV or projector back to the AV receiver up
to 330 Feet (100 meters) away in the basement or electrical closet
without losing the original surround quality while playing movies or
apps on the smart TV. Since there is no compression, no wire-sharing
with other signals, our ARC sound quality is Pure-Perfect, same as the
original, with no loss. Supported formats are standard ARC Dolby
Digital. |
Extended CEC Remote Controls
FIBER PLUGS includes our Enhanced Hi-Velocity CEC over fiber
Consumer Electronic Control link enabling the discovery and control of
all the connected HDMI cec devices directly from the TV or Projector
remote control, without the need for multiple remote controls.
Simply connect your TV or Projector with our PureFIBER Cable to the AV
receiver away in the basement or closet, and the TV/Projector will find
all the devices.
For the proper operation of the CEC, the Fiber Plugs USB power cords
must be connected to a permanent standard 5 Volts source, same as a
phone charger, also available on power strips, with minimal requirement
of 50 milliamperes. Using the USB power on devices is also
possible however when the device is turned off, no cec commands can send
to the other side of the cable. Only legacy old HDMI devices or non-cec capable devices
will not be discovered, and for these simply use our Fiber Docking
accessory.. |
|
